>> Product Details
Titanium copper clad
Time: 2014-03-10 22:30
Titanium copper composite rod performance: titanium copper composite rod as the main components of the metal anode, its role in the following three points:
1: supporting anode; titanium copper composite rod has a certain strength and bending the composite rods yield strength of 128MPa, fully meet the production and design requirements.
2: excellent conductive; rolling method Production completely close composite titanium copper, does not produce delamination therefore has good electrical conductivity properties, the composite strength of 135Mpa, the micro-resistivity is 7.77 × 10-6Ω.
3: corrosion resistance, titanium copper composite rod outer direct contact with the electrolytic medium, the outer layer of pure titanium has excellent corrosion resistance (see below table), its life electrode more than 10 times longer than other materials.
Executive Standard: ASTM DIN GB
Cladding material: titanium Ti, nickel Ni, zirconium Zr, stainless steel (316L), etc.
Substrate material: copper (T2), the oxygen-free copper (TU2), aluminum (AL), etc.
Tip shape and specifications (mm)
Round: φ (2 ~ 80) × (0.5 ~ 3.0)
Drum: φ (25,27,29,32,34) × 14 × (1.0 ~~ 2.0)
Square: the length (10 to 40)
Flat: length (10 ~ 100) × width (10 to 30)
The FILLET R (3 to 5)
Titanium copper composite rod inspection using ultrasonic flaw detection